BITUMELIT PR 5

BITUMELIT PR 5 is designed for waterproofing of reinforced concrete slab of carriage way on bridge constructions and other trafficked areas. Can be also used as single-layer waterproofing of the foundation.

BITUMELIT PR 5 polyester reinforced membranes are applied by traditional Torch – On methods onto previously prepared surface, clear of any debris or sharp projections, primers shall be used to prepare substrate for achieving most effective waterproofing longevity. The membranes should be heated carefully ensuring the complete melt of dispersible film as work proceeds. Side laps must be minimum 75mm with end laps at minimum of 100 mm. The subsequent cap sheet layer should be offset 300 mm from the underlay to avoid build up of overlaps.

Product technical data

  PROPERTIES PERFORMANCE
 Length x width, m 10 x 1
 Thickness, mm ≥ 4.0
 Mass per unit area, kg/m2 -
 Reinforcement type polyester
 Elongation L / T, % 45/45±10
 Tensile strength L / T, N/50 mm ≥ 800 / ≥ 800
 Tear resistance L / T, N -
 Flexibility at low temperature, °C ≤ -10
 Flow resistance at elevated temperature, °C ≥ 120
 Protective covering type on the top slate
 Protective covering type on the bottom film
BITUMELIT PR 5